在这项工作中，我们展示了基于全球导航卫星系统（GNSS）的零速度信息的重要性。在文献中已经示出了使用零速度更新（Zupt）的零速度信息的有效性已经显示在文献中。在这里，我们利用此信息并将其添加为GNSS因子图中的位置约束。我们还将其性能与GNSS /惯用导航系统（INS）耦合因子图进行比较。我们在三个数据集上测试了我们的Zupt辅助因子图方法，并将其与仅限GNSS因子图进行了比较。

滑动检测对于在外星人表面驾驶的流浪者的安全性和效率至关重要。当前的行星流动站滑移检测系统依赖于视觉感知，假设可以在环境中获得足够的视觉特征。然而，基于视觉的方法容易受到感知降解的行星环境，具有主要低地形特征，例如岩石岩，冰川地形，盐散发物以及较差的照明条件，例如黑暗的洞穴和永久阴影区域。仅依靠视觉传感器进行滑动检测也需要额外的计算功率，并降低了流动站的遍历速率。本文回答了如何检测行星漫游者的车轮滑移而不取决于视觉感知的问题。在这方面，我们提出了一个滑动检测系统，该系统从本体感受的本地化框架中获取信息，该框架能够提供数百米的可靠，连续和计算有效的状态估计。这是通过使用零速度更新，零角度更新和非独立限制作为惯性导航系统框架的伪测量更新来完成的。对所提出的方法进行了对实际硬件的评估，并在行星 - 分析环境中进行了现场测试。该方法仅使用IMU和车轮编码器就可以达到150 m左右的92％滑动检测精度。

The performance of inertial navigation systems is largely dependent on the stable flow of external measurements and information to guarantee continuous filter updates and bind the inertial solution drift. Platforms in different operational environments may be prevented at some point from receiving external measurements, thus exposing their navigation solution to drift. Over the years, a wide variety of works have been proposed to overcome this shortcoming, by exploiting knowledge of the system current conditions and turning it into an applicable source of information to update the navigation filter. This paper aims to provide an extensive survey of information aided navigation, broadly classified into direct, indirect, and model aiding. Each approach is described by the notable works that implemented its concept, use cases, relevant state updates, and their corresponding measurement models. By matching the appropriate constraint to a given scenario, one will be able to improve the navigation solution accuracy, compensate for the lost information, and uncover certain internal states, that would otherwise remain unobservable.

因子图最近被出现为GNSS定位的替代解决方法。在本文中，我们审查了因素图在GNSS中实施了，它们与卡尔曼滤波器的一些优点，以及它们在使定位解决方案更强大地降解测量方面的重要性。我们还讨论了因子图如何成为现场无线电导航社区的重要工具。

我们为腿部机器人提供了一个开源视觉惯性训练率（VILO）状态估计解决方案Cerberus，该机器人使用一组标准传感器（包括立体声摄像机，IMU，联合编码器，，imu，联合编码器）实时实时估算各个地形的位置和接触传感器。除了估计机器人状态外，我们还执行在线运动学参数校准并接触离群值拒绝以大大减少位置漂移。在各种室内和室外环境中进行的硬件实验验证了Cerberus中的运动学参数可以将估计的漂移降低到长距离高速运动中的1％以下。我们的漂移结果比文献中报道的相同的一组传感器组比任何其他状态估计方法都要好。此外，即使机器人经历了巨大的影响和摄像头遮挡，我们的状态估计器也表现良好。状态估计器的实现以及用于计算我们结果的数据集，可在https://github.com/shuoyangrobotics/cerberus上获得。

Accurate and smooth global navigation satellite system (GNSS) positioning for pedestrians in urban canyons is still a challenge due to the multipath effects and the non-light-of-sight (NLOS) receptions caused by the reflections from surrounding buildings. The recently developed factor graph optimization (FGO) based GNSS positioning method opened a new window for improving urban GNSS positioning by effectively exploiting the measurement redundancy from the historical information to resist the outlier measurements. Unfortunately, the FGO-based GNSS standalone positioning is still challenged in highly urbanized areas. As an extension of the previous FGO-based GNSS positioning method, this paper exploits the potential of the pedestrian dead reckoning (PDR) model in FGO to improve the GNSS standalone positioning performance in urban canyons. Specifically, the relative motion of the pedestrian is estimated based on the raw acceleration measurements from the onboard smartphone inertial measurement unit (IMU) via the PDR algorithm. Then the raw GNSS pseudorange, Doppler measurements, and relative motion from PDR are integrated using the FGO. Given the context of pedestrian navigation with a small acceleration most of the time, a novel soft motion model is proposed to smooth the states involved in the factor graph model. The effectiveness of the proposed method is verified step-by-step through two datasets collected in dense urban canyons of Hong Kong using smartphone-level GNSS receivers. The comparison between the conventional extended Kalman filter, several existing methods, and FGO-based integration is presented. The results reveal that the existing FGO-based GNSS standalone positioning is highly complementary to the PDR's relative motion estimation. Both improved positioning accuracy and trajectory smoothness are obtained with the help of the proposed method.

A reliable self-contained navigation system is essential for autonomous vehicles. Based on our previous study on Wheel-INS \cite{niu2019}, a wheel-mounted inertial measurement unit (Wheel-IMU)-based dead reckoning (DR) system, in this paper, we propose a multiple IMUs-based DR solution for the wheeled robots. The IMUs are mounted at different places of the wheeled vehicles to acquire various dynamic information. In particular, at least one IMU has to be mounted at the wheel to measure the wheel velocity and take advantages of the rotation modulation. The system is implemented through a distributed extended Kalman filter structure where each subsystem (corresponding to each IMU) retains and updates its own states separately. The relative position constraints between the multiple IMUs are exploited to further limit the error drift and improve the system robustness. Particularly, we present the DR systems using dual Wheel-IMUs, one Wheel-IMU plus one vehicle body-mounted IMU (Body-IMU), and dual Wheel-IMUs plus one Body-IMU as examples for analysis and comparison. Field tests illustrate that the proposed multi-IMU DR system outperforms the single Wheel-INS in terms of both positioning and heading accuracy. By comparing with the centralized filter, the proposed distributed filter shows unimportant accuracy degradation while holds significant computation efficiency. Moreover, among the three multi-IMU configurations, the one Body-IMU plus one Wheel-IMU design obtains the minimum drift rate. The position drift rates of the three configurations are 0.82\% (dual Wheel-IMUs), 0.69\% (one Body-IMU plus one Wheel-IMU), and 0.73\% (dual Wheel-IMUs plus one Body-IMU), respectively.

本文比较了自适应和强大的卡尔曼滤波器算法在改善低特色粗糙地形上改善车轮惯性内径术中的性能。方法包括经典的自适应和鲁棒方法以及变分方法，其在实验上在类似于行星勘探中遇到的地形的轮式漫游器上进行评估。与经典自适应滤光器相比，变分滤波器显示出改善的解决方案精度，并且能够处理错误的车轮测量测量，并保持良好的定位，无需显着漂移。我们还显示参数如何影响本地化性能的变化。

准确的本地化是机器人导航系统的核心组成部分。为此，全球导航卫星系统（GNSS）可以在户外提供绝对的测量，因此消除了长期漂移。但是，将GNSS数据与其他传感器数据进行融合并不是微不足道的，尤其是当机器人在有和没有天空视图的区域之间移动时。我们提出了一种可靠的方法，该方法将原始GNSS接收器数据与惯性测量以及可选的LIDAR观测值紧密地融合在一起，以进行精确和光滑的移动机器人定位。提出了具有两种类型的GNSS因子的因子图。首先，基于伪龙的因素，该因素允许地球上进行全球定位。其次，基于载体阶段的因素，该因素可以实现高度准确的相对定位，这在对其他感应方式受到挑战时很有用。与传统的差异GNS不同，这种方法不需要与基站的连接。在公共城市驾驶数据集上，我们的方法达到了与最先进的算法相当的精度，该算法将视觉惯性探测器与GNSS数据融合在一起 - 尽管我们的方法不使用相机，但仅使用了惯性和GNSS数据。我们还使用来自汽车的数据以及在森林（例如森林）的环境中移动的四倍的机器人，证明了方法的鲁棒性。全球地球框架中的准确性仍然为1-2 m，而估计的轨迹无不连续性和光滑。我们还展示了如何紧密整合激光雷达测量值。我们认为，这是第一个将原始GNSS观察（而不是修复）与LIDAR融合在一起的系统。

GNSS and LiDAR odometry are complementary as they provide absolute and relative positioning, respectively. Their integration in a loosely-coupled manner is straightforward but is challenged in urban canyons due to the GNSS signal reflections. Recent proposed 3D LiDAR-aided (3DLA) GNSS methods employ the point cloud map to identify the non-line-of-sight (NLOS) reception of GNSS signals. This facilitates the GNSS receiver to obtain improved urban positioning but not achieve a sub-meter level. GNSS real-time kinematics (RTK) uses carrier phase measurements to obtain decimeter-level positioning. In urban areas, the GNSS RTK is not only challenged by multipath and NLOS-affected measurement but also suffers from signal blockage by the building. The latter will impose a challenge in solving the ambiguity within the carrier phase measurements. In the other words, the model observability of the ambiguity resolution (AR) is greatly decreased. This paper proposes to generate virtual satellite (VS) measurements using the selected LiDAR landmarks from the accumulated 3D point cloud maps (PCM). These LiDAR-PCM-made VS measurements are tightly-coupled with GNSS pseudorange and carrier phase measurements. Thus, the VS measurements can provide complementary constraints, meaning providing low-elevation-angle measurements in the across-street directions. The implementation is done using factor graph optimization to solve an accurate float solution of the ambiguity before it is fed into LAMBDA. The effectiveness of the proposed method has been validated by the evaluation conducted on our recently open-sourced challenging dataset, UrbanNav. The result shows the fix rate of the proposed 3DLA GNSS RTK is about 30% while the conventional GNSS-RTK only achieves about 14%. In addition, the proposed method achieves sub-meter positioning accuracy in most of the data collected in challenging urban areas.

Accurate and consistent vehicle localization in urban areas is challenging due to the large-scale and complicated environments. In this paper, we propose onlineFGO, a novel time-centric graph-optimization-based localization method that fuses multiple sensor measurements with the continuous-time trajectory representation for vehicle localization tasks. We generalize the graph construction independent of any spatial sensor measurements by creating the states deterministically on time. As the trajectory representation in continuous-time enables querying states at arbitrary times, incoming sensor measurements can be factorized on the graph without requiring state alignment. We integrate different GNSS observations: pseudorange, deltarange, and time-differenced carrier phase (TDCP) to ensure global reference and fuse the relative motion from a LiDAR-odometry to improve the localization consistency while GNSS observations are not available. Experiments on general performance, effects of different factors, and hyper-parameter settings are conducted in a real-world measurement campaign in Aachen city that contains different urban scenarios. Our results show an average 2D error of 0.99m and consistent state estimation in urban scenarios.

安装在微空中车辆（MAV）上的地面穿透雷达是有助于协助人道主义陆地间隙的工具。然而，合成孔径雷达图像的质量取决于雷达天线的准确和精确运动估计以及与MAV产生信息性的观点。本文介绍了一个完整的自动空气缩进的合成孔径雷达（GPSAR）系统。该系统由空间校准和时间上同步的工业级传感器套件组成，使得在地面上方，雷达成像和光学成像。自定义任务规划框架允许在地上控制地上的Stripmap和圆形（GPSAR）轨迹的生成和自动执行，以及空中成像调查飞行。基于因子图基于Dual接收机实时运动（RTK）全局导航卫星系统（GNSS）和惯性测量单元（IMU）的测量值，以获得精确，高速平台位置和方向。地面真理实验表明，传感器时机为0.8美元，正如0.1美元的那样，定位率为1 kHz。与具有不确定标题初始化的单个位置因子相比，双位置因子配方可提高高达40％，批量定位精度高达59％。我们的现场试验验证了本地化准确性和精度，使得能够相干雷达测量和检测在沙子中埋入的雷达目标。这验证了作为鸟瞰着地图检测系统的潜力。

The field of autonomous mobile robots has undergone dramatic advancements over the past decades. Despite achieving important milestones, several challenges are yet to be addressed. Aggregating the achievements of the robotic community as survey papers is vital to keep the track of current state-of-the-art and the challenges that must be tackled in the future. This paper tries to provide a comprehensive review of autonomous mobile robots covering topics such as sensor types, mobile robot platforms, simulation tools, path planning and following, sensor fusion methods, obstacle avoidance, and SLAM. The urge to present a survey paper is twofold. First, autonomous navigation field evolves fast so writing survey papers regularly is crucial to keep the research community well-aware of the current status of this field. Second, deep learning methods have revolutionized many fields including autonomous navigation. Therefore, it is necessary to give an appropriate treatment of the role of deep learning in autonomous navigation as well which is covered in this paper. Future works and research gaps will also be discussed.

We propose a framework for tightly-coupled lidar inertial odometry via smoothing and mapping, LIO-SAM, that achieves highly accurate, real-time mobile robot trajectory estimation and map-building. LIO-SAM formulates lidar-inertial odometry atop a factor graph, allowing a multitude of relative and absolute measurements, including loop closures, to be incorporated from different sources as factors into the system. The estimated motion from inertial measurement unit (IMU) pre-integration de-skews point clouds and produces an initial guess for lidar odometry optimization. The obtained lidar odometry solution is used to estimate the bias of the IMU. To ensure high performance in real-time, we marginalize old lidar scans for pose optimization, rather than matching lidar scans to a global map. Scan-matching at a local scale instead of a global scale significantly improves the real-time performance of the system, as does the selective introduction of keyframes, and an efficient sliding window approach that registers a new keyframe to a fixed-size set of prior "sub-keyframes." The proposed method is extensively evaluated on datasets gathered from three platforms over various scales and environments.

移动机器人用于工业，休闲和军事应用。在某些情况下，机器人导航解决方案仅依赖于惯性传感器，因此，导航解决方案会及时漂移。在本文中，我们提出了MORPI框架，这是一种移动机器人纯惯性方法。机器人没有以直线轨迹行进，而是以周期性运动轨迹移动，以实现峰值估计。以这种方式，使用经验公式来估计行进距离，而不是进行三个集成来计算经典惯性解决方案中的机器人位置。提出了两种类型的MORPI方法，其中一种方法基于加速度计和陀螺仪读数，而另一种仅基于陀螺仪。封闭形式的分析溶液被得出表明，与经典的纯惯性溶液相比，MORPI产生较低的位置误差。此外，为了评估所提出的方法，使用配备两种类型的惯性传感器的移动机器人进行现场实验。总共收集了143个轨迹，持续时间为75分钟并评估。结果表明使用我们的方法的好处。为了促进拟议方法的进一步开发，数据集和代码均可在https://github.com/ansfl/morpi上公开获得。

A reliable pose estimator robust to environmental disturbances is desirable for mobile robots. To this end, inertial measurement units (IMUs) play an important role because they can perceive the full motion state of the vehicle independently. However, it suffers from accumulative error due to inherent noise and bias instability, especially for low-cost sensors. In our previous studies on Wheel-INS \cite{niu2021, wu2021}, we proposed to limit the error drift of the pure inertial navigation system (INS) by mounting an IMU to the wheel of the robot to take advantage of rotation modulation. However, it still drifted over a long period of time due to the lack of external correction signals. In this letter, we propose to exploit the environmental perception ability of Wheel-INS to achieve simultaneous localization and mapping (SLAM) with only one IMU. To be specific, we use the road bank angles (mirrored by the robot roll angles estimated by Wheel-INS) as terrain features to enable the loop closure with a Rao-Blackwellized particle filter. The road bank angle is sampled and stored according to the robot position in the grid maps maintained by the particles. The weights of the particles are updated according to the difference between the currently estimated roll sequence and the terrain map. Field experiments suggest the feasibility of the idea to perform SLAM in Wheel-INS using the robot roll angle estimates. In addition, the positioning accuracy is improved significantly (more than 30\%) over Wheel-INS. Source code of our implementation is publicly available (https://github.com/i2Nav-WHU/Wheel-SLAM).

惯性导航系统与全球导航卫星系统之间的融合经常用于许多平台，例如无人机，陆地车辆和船舶船只。融合通常是在基于模型的扩展卡尔曼过滤框架中进行的。过滤器的关键参数之一是过程噪声协方差。它负责实时解决方案的准确性，因为它考虑了车辆动力学不确定性和惯性传感器质量。在大多数情况下，过程噪声被认为是恒定的。然而，由于整个轨迹的车辆动力学和传感器测量变化，过程噪声协方差可能会发生变化。为了应对这种情况，文献中建议了几种基于自适应的Kalman过滤器。在本文中，我们提出了一个混合模型和基于学习的自适应导航过滤器。我们依靠基于模型的Kalman滤波器和设计深神网络模型来调整瞬时系统噪声协方差矩阵，仅基于惯性传感器读数。一旦学习了过程噪声协方差，就可以将其插入建立的基于模型的Kalman滤波器中。在推导了提出的混合框架后，提出了使用四极管的现场实验结果，并给出了与基于模型的自适应方法进行比较。我们表明，所提出的方法在位置误差中获得了25％的改善。此外，提出的混合学习方法可以在任何导航过滤器以及任何相关估计问题中使用。

我们提出了一种准确而坚固的多模态传感器融合框架，Metroloc，朝着最极端的场景之一，大规模地铁车辆本地化和映射。 Metroloc在以IMU为中心的状态估计器上构建，以较轻耦合的方法紧密地耦合光检测和测距（LIDAR），视觉和惯性信息。所提出的框架由三个子模块组成：IMU Odometry，LiDar - 惯性内径术（LIO）和视觉惯性内径（VIO）。 IMU被视为主要传感器，从LIO和VIO实现了从LIO和VIO的观察，以限制加速度计和陀螺仪偏差。与以前的点LIO方法相比，我们的方法通过将线路和平面特征引入运动估计来利用更多几何信息。 VIO还通过使用两条线和点来利用环境结构信息。我们所提出的方法在具有维护车辆的长期地铁环境中广泛测试。实验结果表明，该系统比使用实时性能的最先进的方法更准确和强大。此外，我们开发了一系列虚拟现实（VR）应用，以实现高效，经济，互动的轨道车辆状态和轨道基础设施监控，已经部署到室外测试铁路。

本文介绍了一种基于来自IMU数据的学习的位移测量的腿机器人的新型概述状态估计。最近的行人跟踪研究表明，可以使用卷积神经网络从惯性数据推断出运动。学习的惯性位移测量可以提高具有挑战性的场景的状态估计，其中腿部内径是不可靠的，例如滑动和可压缩的地形。我们的工作学会从IMU数据估算从IMU数据融合的位移测量，然后与传统的腿部腿部融合。我们的方法大大降低了诸如在视觉中部署的腿部机器人和Lidar被否定的环境（如有雾的下水道或尘土飞扬的地雷）至关重要。我们使用来自几个真正的机器人实验的数据与交叉挑战性地形的几个真正的机器人实验进行了比较了来自EKF和增量固定滞后因子图估计的结果。与传统的运动惯用估计器相比，我们的结果在挑战情景中表明相对姿势误差的减少37％，而无需学习测量。当在视觉降级环境中的视觉系统中使用时，我们还展示了22％的误差减少，例如地下矿井。

我们在本文中介绍Raillomer，实现实时准确和鲁棒的内径测量和轨道车辆的测绘。 Raillomer从两个Lidars，IMU，火车车程和全球导航卫星系统（GNSS）接收器接收测量。作为前端，来自IMU / Royomer缩放组的估计动作De-Skews DeSoised Point云并为框架到框架激光轨道测量产生初始猜测。作为后端，配制了基于滑动窗口的因子图以共同优化多模态信息。另外，我们利用来自提取的轨道轨道和结构外观描述符的平面约束，以进一步改善对重复结构的系统鲁棒性。为了确保全局常见和更少的模糊映射结果，我们开发了一种两级映射方法，首先以本地刻度执行扫描到地图，然后利用GNSS信息来注册模块。该方法在聚集的数据集上广泛评估了多次范围内的数据集，并且表明Raillomer即使在大或退化的环境中也能提供排入量级定位精度。我们还将Raillomer集成到互动列车状态和铁路监控系统原型设计中，已经部署到实验货量交通铁路。