Autonomous driving is an exciting new industry, posing important research questions. Within the perception module, 3D human pose estimation is an emerging technology, which can enable the autonomous vehicle to perceive and understand the subtle and complex behaviors of pedestrians. While hardware systems and sensors have dramatically improved over the decades -- with cars potentially boasting complex LiDAR and vision systems and with a growing expansion of the available body of dedicated datasets for this newly available information -- not much work has been done to harness these novel signals for the core problem of 3D human pose estimation. Our method, which we coin HUM3DIL (HUMan 3D from Images and LiDAR), efficiently makes use of these complementary signals, in a semi-supervised fashion and outperforms existing methods with a large margin. It is a fast and compact model for onboard deployment. Specifically, we embed LiDAR points into pixel-aligned multi-modal features, which we pass through a sequence of Transformer refinement stages. Quantitative experiments on the Waymo Open Dataset support these claims, where we achieve state-of-the-art results on the task of 3D pose estimation.

Depth estimation is usually ill-posed and ambiguous for monocular camera-based 3D multi-person pose estimation. Since LiDAR can capture accurate depth information in long-range scenes, it can benefit both the global localization of individuals and the 3D pose estimation by providing rich geometry features. Motivated by this, we propose a monocular camera and single LiDAR-based method for 3D multi-person pose estimation in large-scale scenes, which is easy to deploy and insensitive to light. Specifically, we design an effective fusion strategy to take advantage of multi-modal input data, including images and point cloud, and make full use of temporal information to guide the network to learn natural and coherent human motions. Without relying on any 3D pose annotations, our method exploits the inherent geometry constraints of point cloud for self-supervision and utilizes 2D keypoints on images for weak supervision. Extensive experiments on public datasets and our newly collected dataset demonstrate the superiority and generalization capability of our proposed method.

了解来自第一人称观点的社交互动对于许多应用来说至关重要，从辅助机器人到AR / VR。谈论相互作用的第一步是理解人类的姿势和形状。但是，该领域的研究目前受到数据缺乏的阻碍。现有数据集根据大小，注释，地面真实捕获方式或相互作用的多样性有限。我们通过提出EGOBODY来解决这一缺点，这是一个用于复杂3D场景中的社交交互的新型大规模数据集。我们采用Microsoft Hololens2耳机来记录富裕的EGEntric数据流（包括RGB，深度，眼睛凝视，头部和手动跟踪）。为了获得准确的3D地面真理，我们将耳机用多kinect钻机校准并配合富有呈现的SMPL-X体网格到多视图RGB-D帧，重建3D人类姿势和相对于场景的形状。我们收集68个序列，跨越不同的社会学互动类别，并提出了从自我监视视图的3D全体姿态和形状估计的第一个基准。我们的数据集和代码将在https://sanweiliti.github.io/egobody/egobody.html中进行研究。

培训视频中人类姿势估计的最先进模型需要具有很难获得的注释的数据集。尽管最近已将变压器用于身体姿势序列建模，但相关方法依靠伪地真相来增强目前有限的培训数据可用于学习此类模型。在本文中，我们介绍了Posebert，Posebert是一个通过掩盖建模对3D运动捕获（MOCAP）数据进行全面训练的变压器模块。它是简单，通用和通用的，因为它可以插入任何基于图像的模型的顶部，以在基于视频的模型中使用时间信息。我们展示了Posebert的变体，不同的输入从3D骨骼关键点到全身或仅仅是手（Mano）的3D参数模型的旋转。由于Posebert培训是任务不可知论的，因此该模型可以应用于姿势细化，未来的姿势预测或运动完成等几个任务。我们的实验结果验证了在各种最新姿势估计方法之上添加Posebert始终提高其性能，而其低计算成本使我们能够在实时演示中使用它，以通过A的机器人手使机器人手通过摄像头。可以在https://github.com/naver/posebert上获得测试代码和型号。

From an image of a person in action, we can easily guess the 3D motion of the person in the immediate past and future. This is because we have a mental model of 3D human dynamics that we have acquired from observing visual sequences of humans in motion. We present a framework that can similarly learn a representation of 3D dynamics of humans from video via a simple but effective temporal encoding of image features. At test time, from video, the learned temporal representation give rise to smooth 3D mesh predictions. From a single image, our model can recover the current 3D mesh as well as its 3D past and future motion. Our approach is designed so it can learn from videos with 2D pose annotations in a semi-supervised manner. Though annotated data is always limited, there are millions of videos uploaded daily on the Internet. In this work, we harvest this Internet-scale source of unlabeled data by training our model on unlabeled video with pseudo-ground truth 2D pose obtained from an off-the-shelf 2D pose detector. Our experiments show that adding more videos with pseudo-ground truth 2D pose monotonically improves 3D prediction performance. We evaluate our model, Human Mesh and Motion Recovery (HMMR), on the recent challenging dataset of 3D Poses in the Wild and obtain state-of-the-art performance on the 3D prediction task without any fine-tuning. The project website with video, code, and data can be found at https://akanazawa.github.io/ human_dynamics/.

在本文中，我们考虑了同时找到和从单个2D图像中恢复多手的具有挑战性的任务。先前的研究要么关注单手重建，要么以多阶段的方式解决此问题。此外，常规的两阶段管道首先检测到手部区域，然后估计每个裁剪贴片的3D手姿势。为了减少预处理和特征提取中的计算冗余，我们提出了一条简洁但有效的单阶段管道。具体而言，我们为多手重建设计了多头自动编码器结构，每个HEAD网络分别共享相同的功能图并分别输出手动中心，姿势和纹理。此外，我们采用了一个弱监督的计划来减轻昂贵的3D现实世界数据注释的负担。为此，我们提出了一系列通过舞台训练方案优化的损失，其中根据公开可用的单手数据集生成具有2D注释的多手数据集。为了进一步提高弱监督模型的准确性，我们在单手和多个手设置中采用了几个功能一致性约束。具体而言，从本地功能估算的每只手的关键点应与全局功能预测的重新投影点一致。在包括Freihand，HO3D，Interhand 2.6M和RHD在内的公共基准测试的广泛实验表明，我们的方法在弱监督和完全监督的举止中优于基于最先进的模型方法。代码和模型可在{\ url {https://github.com/zijinxuxu/smhr}}上获得。

Input Reconstruction Side and top down view Part Segmentation Input Reconstruction Side and top down view Part Segmentation Figure 1: Human Mesh Recovery (HMR): End-to-end adversarial learning of human pose and shape. We describe a real time framework for recovering the 3D joint angles and shape of the body from a single RGB image. The first two rowsshow results from our model trained with some 2D-to-3D supervision, the bottom row shows results from a model that is trained in a fully weakly-supervised manner without using any paired 2D-to-3D supervision. We infer the full 3D body even in case of occlusions and truncations. Note that we capture head and limb orientations.

在鸟眼中学习强大的表现（BEV），以进行感知任务，这是趋势和吸引行业和学术界的广泛关注。大多数自动驾驶算法的常规方法在正面或透视视图中执行检测，细分，跟踪等。随着传感器配置变得越来越复杂，从不同的传感器中集成了多源信息，并在统一视图中代表功能至关重要。 BEV感知继承了几个优势，因为代表BEV中的周围场景是直观和融合友好的。对于BEV中的代表对象，对于随后的模块，如计划和/或控制是最可取的。 BEV感知的核心问题在于（a）如何通过从透视视图到BEV来通过视图转换来重建丢失的3D信息； （b）如何在BEV网格中获取地面真理注释； （c）如何制定管道以合并来自不同来源和视图的特征； （d）如何适应和概括算法作为传感器配置在不同情况下各不相同。在这项调查中，我们回顾了有关BEV感知的最新工作，并对不同解决方案进行了深入的分析。此外，还描述了该行业的BEV方法的几种系统设计。此外，我们推出了一套完整的实用指南，以提高BEV感知任务的性能，包括相机，激光雷达和融合输入。最后，我们指出了该领域的未来研究指示。我们希望该报告能阐明社区，并鼓励对BEV感知的更多研究。我们保留一个活跃的存储库来收集最新的工作，并在https://github.com/openperceptionx/bevperception-survey-recipe上提供一包技巧的工具箱。

基于LIDAR的传感驱动器电流自主车辆。尽管进展迅速，但目前的激光雷达传感器在分辨率和成本方面仍然落后于传统彩色相机背后的二十年。对于自主驾驶，这意味着靠近传感器的大物体很容易可见，但远方或小物体仅包括一个测量或两个。这是一个问题，尤其是当这些对象结果驾驶危险时。另一方面，在车载RGB传感器中清晰可见这些相同的对象。在这项工作中，我们提出了一种将RGB传感器无缝熔化成基于LIDAR的3D识别方法。我们的方法采用一组2D检测来生成密集的3D虚拟点，以增加否则稀疏的3D点云。这些虚拟点自然地集成到任何基于标准的LIDAR的3D探测器以及常规激光雷达测量。由此产生的多模态检测器简单且有效。大规模NUSCENES数据集的实验结果表明，我们的框架通过显着的6.6地图改善了强大的中心点基线，并且优于竞争融合方法。代码和更多可视化可在https://tianweiy.github.io/mvp/上获得

Figure 1: Given challenging in-the-wild videos, a recent state-of-the-art video-pose-estimation approach [31] (top), fails to produce accurate 3D body poses. To address this, we exploit a large-scale motion-capture dataset to train a motion discriminator using an adversarial approach. Our model (VIBE) (bottom) is able to produce realistic and accurate pose and shape, outperforming previous work on standard benchmarks.

We introduce a new dataset, Human3.6M, of 3.6 Million accurate 3D Human poses, acquired by recording the performance of 5 female and 6 male subjects, under 4 different viewpoints, for training realistic human sensing systems and for evaluating the next generation of human pose estimation models and algorithms. Besides increasing the size of the datasets in the current state of the art by several orders of magnitude, we also aim to complement such datasets with a diverse set of motions and poses encountered as part of typical human activities (taking photos, talking on the phone, posing, greeting, eating, etc.), with additional synchronized image, human motion capture and time of flight (depth) data, and with accurate 3D body scans of all the subject actors involved. We also provide controlled mixed reality evaluation scenarios where 3D human models are animated using motion capture and inserted using correct 3D geometry, in complex real environments, viewed with moving cameras, and under occlusion. Finally, we provide a set of large scale statistical models and detailed evaluation baselines for the dataset illustrating its diversity and the scope for improvement by future work in the research community. Our experiments show that our best large scale model can leverage our full training set to obtain a 20% improvement in performance compared to a training set of the scale of the largest existing public dataset for this problem. Yet the potential for improvement by leveraging higher capacity, more complex models with our large dataset, is substantially vaster and should stimulate future research. The dataset together with code for the associated large-scale learning models, features, visualization tools, as well as the evaluation server, is available online at http://vision.imar.ro/human3.6m.

毫米波（mmwave）雷达在不利的环境中起作用，例如在烟，雨，雪，照明等不良环境中起作用。先前的工作探索了从嘈杂且稀疏的MMWAVE雷达信号中重建3D骨骼或网格的可能性。但是，目前尚不清楚我们如何准确地从跨场景的MMWave信号重建3D主体，以及与摄像机相比的性能，当单独使用MMWave雷达或将它们与摄像机结合时，这是需要考虑的重要方面。为了回答这些问题，首先设计并构建了多个传感器，以收集大规模数据集。该数据集由在不同场景中的同步和校准的MMWave雷达点云和RGB（D）图像组成，以及在场景中人类的骨架/网格注释。使用此数据集，我们使用来自不同传感器的输入来训练最先进的方法，并在各种情况下对其进行测试。结果表明，1）尽管生成点云的噪音和稀疏性，MMWave雷达可以比RGB摄像机获得更好的重建精度，但比深度摄像头还差； 2）MMWave雷达的重建受不利天气条件的影响，而RGB（D）摄像机受到严重影响。此外，对数据集的分析和结果对改善MMWave雷达重建的重建以及来自不同传感器的信号的组合的洞察力。

估计对象的6D姿势是必不可少的计算机视觉任务。但是，大多数常规方法从单个角度依赖相机数据，因此遭受遮挡。我们通过称为MV6D的新型多视图6D姿势估计方法克服了这个问题，该方法从多个角度根据RGB-D图像准确地预测了混乱场景中所有对象的6D姿势。我们将方法以PVN3D网络为基础，该网络使用单个RGB-D图像来预测目标对象的关键点。我们通过从多个视图中使用组合点云来扩展此方法，并将每个视图中的图像与密集层层融合。与当前的多视图检测网络（例如Cosypose）相反，我们的MV6D可以以端到端的方式学习多个观点的融合，并且不需要多个预测阶段或随后对预测的微调。此外，我们介绍了三个新颖的影像学数据集，这些数据集具有沉重的遮挡的混乱场景。所有这些都从多个角度包含RGB-D图像，例如语义分割和6D姿势估计。即使在摄像头不正确的情况下，MV6D也明显优于多视图6D姿势估计中最新的姿势估计。此外，我们表明我们的方法对动态相机设置具有强大的态度，并且其准确性随着越来越多的观点而逐渐增加。

当标记的数据丰富时，从单个图像中进行3D姿势估计的监督方法非常有效。但是，由于对地面3D标签的获取是劳动密集型且耗时的，最近的关注已转向半决赛和弱监督的学习。产生有效的监督形式，几乎没有注释，仍然在拥挤的场景中构成重大挑战。在本文中，我们建议通过加权区分三角剖分施加多视文几何约束，并在没有标签时将其用作一种自我设计的形式。因此，我们以一种方式训练2D姿势估计器，以使其预测对应于对三角姿势的3D姿势的重新投影，并在其上训练辅助网络以产生最终的3D姿势。我们通过一种加权机制来补充三角剖分，从而减轻了由自我咬合或其他受试者的遮挡引起的嘈杂预测的影响。我们证明了半监督方法对人类36M和MPI-INF-3DHP数据集的有效性，以及在具有闭塞的新的多视频多人数据集上。

A key technical challenge in performing 6D object pose estimation from RGB-D image is to fully leverage the two complementary data sources. Prior works either extract information from the RGB image and depth separately or use costly post-processing steps, limiting their performances in highly cluttered scenes and real-time applications. In this work, we present DenseFusion, a generic framework for estimating 6D pose of a set of known objects from RGB-D images. DenseFusion is a heterogeneous architecture that processes the two data sources individually and uses a novel dense fusion network to extract pixel-wise dense feature embedding, from which the pose is estimated. Furthermore, we integrate an end-to-end iterative pose refinement procedure that further improves the pose estimation while achieving near real-time inference. Our experiments show that our method outperforms state-of-the-art approaches in two datasets, YCB-Video and LineMOD. We also deploy our proposed method to a real robot to grasp and manipulate objects based on the estimated pose. Our code and video are available at https://sites.google.com/view/densefusion/.

多摄像机跟踪系统在需要高质量跟踪结果的应用中获得普及，例如摩擦结账，因为单眼多物体跟踪（MOT）系统由于闭塞而在杂乱和拥挤的环境中经常失败。通过恢复部分3D信息，多个高度重叠的相机可以显着减轻问题。但是，使用不同的相机设置和背景创建高质量多摄像头跟踪数据集的成本在该域中的数据集比例限制了数据集尺度。在本文中，我们在自动注释系统的帮助下提供了五种不同环境的大型密集标记的多摄像头跟踪数据集。该系统使用重叠和校准的深度和RGB相机来构建高性能3D跟踪器，可自动生成3D跟踪结果。使用摄像机参数将3D跟踪结果投影到每个RGB摄像头视图以创建2D跟踪结果。然后，我们手动检查并更正3D跟踪结果以确保标签质量，比完全手动注释便宜得多。我们使用两个实时多相机跟踪器和具有不同设置的人重新识别（REID）模型进行了广泛的实验。该数据集在杂乱和拥挤的环境中提供了更可靠的多摄像头，多目标跟踪系统的基准。此外，我们的结果表明，在此数据集中调整跟踪器和REID模型显着提高了它们的性能。我们的数据集将在接受这项工作后公开发布。

We introduce Structured 3D Features, a model based on a novel implicit 3D representation that pools pixel-aligned image features onto dense 3D points sampled from a parametric, statistical human mesh surface. The 3D points have associated semantics and can move freely in 3D space. This allows for optimal coverage of the person of interest, beyond just the body shape, which in turn, additionally helps modeling accessories, hair, and loose clothing. Owing to this, we present a complete 3D transformer-based attention framework which, given a single image of a person in an unconstrained pose, generates an animatable 3D reconstruction with albedo and illumination decomposition, as a result of a single end-to-end model, trained semi-supervised, and with no additional postprocessing. We show that our S3F model surpasses the previous state-of-the-art on various tasks, including monocular 3D reconstruction, as well as albedo and shading estimation. Moreover, we show that the proposed methodology allows novel view synthesis, relighting, and re-posing the reconstruction, and can naturally be extended to handle multiple input images (e.g. different views of a person, or the same view, in different poses, in video). Finally, we demonstrate the editing capabilities of our model for 3D virtual try-on applications.

In this work, we study 3D object detection from RGB-D data in both indoor and outdoor scenes. While previous methods focus on images or 3D voxels, often obscuring natural 3D patterns and invariances of 3D data, we directly operate on raw point clouds by popping up RGB-D scans. However, a key challenge of this approach is how to efficiently localize objects in point clouds of large-scale scenes (region proposal). Instead of solely relying on 3D proposals, our method leverages both mature 2D object detectors and advanced 3D deep learning for object localization, achieving efficiency as well as high recall for even small objects. Benefited from learning directly in raw point clouds, our method is also able to precisely estimate 3D bounding boxes even under strong occlusion or with very sparse points. Evaluated on KITTI and SUN RGB-D 3D detection benchmarks, our method outperforms the state of the art by remarkable margins while having real-time capability. * Majority of the work done as an intern at Nuro, Inc. depth to point cloud 2D region (from CNN) to 3D frustum 3D box (from PointNet)

场景理解是一个活跃的研究区域。商业深度传感器（如Kinect）在过去几年中启用了几个RGB-D数据集的发布，它在3D场景理解中产生了新的方法。最近，在Apple的iPad和iPhone中推出LIDAR传感器，可以在他们通常使用的设备上访问高质量的RGB-D数据。这在对计算机视觉社区以及应用程序开发人员来说，这是一个全新的时代。现场理解的基本研究与机器学习的进步一起可以影响人们的日常经历。然而，将这些现场改变为现实世界经验的理解方法需要额外的创新和发展。在本文中，我们介绍了Arkitscenes。它不仅是具有现在广泛可用深度传感器的第一个RGB-D数据集，而且是我们最好的知识，它也是了解数据发布的最大的室内场景。除了来自移动设备的原始和处理的数据之外，Arkitscenes还包括使用固定激光扫描仪捕获的高分辨率深度图，以及手动标记为家具的大型分类的3D定向边界盒。我们进一步分析了两个下游任务数据的有用性：3D对象检测和色彩引导深度上采样。我们展示了我们的数据集可以帮助推动现有最先进的方法的边界，并引入了更好代表真实情景的新挑战。

全面监督的人类网格恢复方法是渴望数据的，由于3D规定基准数据集的可用性有限和多样性，因此具有较差的概括性。使用合成数据驱动的训练范例，已经从合成配对的2D表示（例如2D关键点和分段掩码）和3D网格中训练了模型的最新进展，其中已使用合成数据驱动的训练范例和3D网格进行了训练。但是，由于合成训练数据和实际测试数据之间的域间隙很难解决2D密集表示，因此很少探索合成密集的对应图（即IUV）。为了减轻IUV上的这个领域差距，我们提出了使用可靠但稀疏表示的互补信息（2D关键点）提出的交叉代理对齐。具体而言，初始网格估计和两个2D表示之间的比对误差将转发为回归器，并在以下网格回归中动态校正。这种适应性的交叉代理对准明确地从偏差和捕获互补信息中学习：从稀疏的表示和浓郁的浓度中的稳健性。我们对多个标准基准数据集进行了广泛的实验，并展示了竞争结果，帮助减少在人类网格估计中生产最新模型所需的注释工作。