深神网络的对象探测器正在不断发展，并用于多种应用程序，每个应用程序都有自己的要求集。尽管关键安全应用需要高准确性和可靠性，但低延迟任务需要资源和节能网络。不断提出了实时探测器，在高影响现实世界中是必需的，但是它们过分强调了准确性和速度的提高，而其他功能（例如多功能性，鲁棒性，资源和能源效率）则被省略。现有网络的参考基准不存在，设计新网络的标准评估指南也不存在，从而导致比较模棱两可和不一致的比较。因此，我们对广泛的数据集进行了多个实时探测器（基于锚点，关键器和变压器）的全面研究，并报告了一系列广泛指标的结果。我们还研究了变量，例如图像大小，锚固尺寸，置信阈值和架构层对整体性能的影响。我们分析了检测网络的鲁棒性，以防止分配变化，自然腐败和对抗性攻击。此外，我们提供了校准分析来评估预测的可靠性。最后，为了强调现实世界的影响，我们对自动驾驶和医疗保健应用进行了两个独特的案例研究。为了进一步衡量关键实时应用程序中网络的能力，我们报告了在Edge设备上部署检测网络后的性能。我们广泛的实证研究可以作为工业界对现有网络做出明智选择的指南。我们还希望激发研究社区的设计和评估网络的新方向，该网络着重于更大而整体的概述，以实现深远的影响。

Due to object detection's close relationship with video analysis and image understanding, it has attracted much research attention in recent years. Traditional object detection methods are built on handcrafted features and shallow trainable architectures. Their performance easily stagnates by constructing complex ensembles which combine multiple low-level image features with high-level context from object detectors and scene classifiers. With the rapid development in deep learning, more powerful tools, which are able to learn semantic, high-level, deeper features, are introduced to address the problems existing in traditional architectures. These models behave differently in network architecture, training strategy and optimization function, etc. In this paper, we provide a review on deep learning based object detection frameworks. Our review begins with a brief introduction on the history of deep learning and its representative tool, namely Convolutional Neural Network (CNN). Then we focus on typical generic object detection architectures along with some modifications and useful tricks to improve detection performance further. As distinct specific detection tasks exhibit different characteristics, we also briefly survey several specific tasks, including salient object detection, face detection and pedestrian detection. Experimental analyses are also provided to compare various methods and draw some meaningful conclusions. Finally, several promising directions and tasks are provided to serve as guidelines for future work in both object detection and relevant neural network based learning systems.

基于无人机（UAV）基于无人机的视觉对象跟踪已实现了广泛的应用，并且由于其多功能性和有效性而引起了智能运输系统领域的越来越多的关注。作为深度学习革命性趋势的新兴力量，暹罗网络在基于无人机的对象跟踪中闪耀，其准确性，稳健性和速度有希望的平衡。由于开发了嵌入式处理器和深度神经网络的逐步优化，暹罗跟踪器获得了广泛的研究并实现了与无人机的初步组合。但是，由于无人机在板载计算资源和复杂的现实情况下，暹罗网络的空中跟踪仍然在许多方面都面临严重的障碍。为了进一步探索基于无人机的跟踪中暹罗网络的部署，这项工作对前沿暹罗跟踪器进行了全面的审查，以及使用典型的无人机板载处理器进行评估的详尽无人用分析。然后，进行板载测试以验证代表性暹罗跟踪器在现实世界无人机部署中的可行性和功效。此外，为了更好地促进跟踪社区的发展，这项工作分析了现有的暹罗跟踪器的局限性，并进行了以低弹片评估表示的其他实验。最后，深入讨论了基于无人机的智能运输系统的暹罗跟踪的前景。领先的暹罗跟踪器的统一框架，即代码库及其实验评估的结果，请访问https://github.com/vision4robotics/siamesetracking4uav。

面部检测是为了在图像中搜索面部的所有可能区域，并且如果有任何情况，则定位面部。包括面部识别，面部表情识别，面部跟踪和头部姿势估计的许多应用假设面部的位置和尺寸在图像中是已知的。近几十年来，研究人员从Viola-Jones脸上检测器创造了许多典型和有效的面部探测器到当前的基于CNN的CNN。然而，随着图像和视频的巨大增加，具有面部刻度的变化，外观，表达，遮挡和姿势，传统的面部探测器被挑战来检测野外面孔的各种“脸部。深度学习技术的出现带来了非凡的检测突破，以及计算的价格相当大的价格。本文介绍了代表性的深度学习的方法，并在准确性和效率方面提出了深度和全面的分析。我们进一步比较并讨论了流行的并挑战数据集及其评估指标。进行了几种成功的基于深度学习的面部探测器的全面比较，以使用两个度量来揭示其效率：拖鞋和延迟。本文可以指导为不同应用选择合适的面部探测器，也可以开发更高效和准确的探测器。

随着深度卷积神经网络的兴起，对象检测在过去几年中取得了突出的进步。但是，这种繁荣无法掩盖小物体检测（SOD）的不令人满意的情况，这是计算机视觉中臭名昭著的挑战性任务之一，这是由于视觉外观不佳和由小目标的内在结构引起的嘈杂表示。此外，用于基准小对象检测方法基准测试的大规模数据集仍然是瓶颈。在本文中，我们首先对小物体检测进行了详尽的审查。然后，为了催化SOD的发展，我们分别构建了两个大规模的小物体检测数据集（SODA），SODA-D和SODA-A，分别集中在驾驶和空中场景上。 SODA-D包括24704个高质量的交通图像和277596个9个类别的实例。对于苏打水，我们收集2510个高分辨率航空图像，并在9个类别上注释800203实例。众所周知，拟议的数据集是有史以来首次尝试使用针对多类SOD量身定制的大量注释实例进行大规模基准测试。最后，我们评估主流方法在苏打水上的性能。我们预计发布的基准可以促进SOD的发展，并产生该领域的更多突破。数据集和代码将很快在：\ url {https://shaunyuan22.github.io/soda}上。

Single-frame InfraRed Small Target (SIRST) detection has been a challenging task due to a lack of inherent characteristics, imprecise bounding box regression, a scarcity of real-world datasets, and sensitive localization evaluation. In this paper, we propose a comprehensive solution to these challenges. First, we find that the existing anchor-free label assignment method is prone to mislabeling small targets as background, leading to their omission by detectors. To overcome this issue, we propose an all-scale pseudo-box-based label assignment scheme that relaxes the constraints on scale and decouples the spatial assignment from the size of the ground-truth target. Second, motivated by the structured prior of feature pyramids, we introduce the one-stage cascade refinement network (OSCAR), which uses the high-level head as soft proposals for the low-level refinement head. This allows OSCAR to process the same target in a cascade coarse-to-fine manner. Finally, we present a new research benchmark for infrared small target detection, consisting of the SIRST-V2 dataset of real-world, high-resolution single-frame targets, the normalized contrast evaluation metric, and the DeepInfrared toolkit for detection. We conduct extensive ablation studies to evaluate the components of OSCAR and compare its performance to state-of-the-art model-driven and data-driven methods on the SIRST-V2 benchmark. Our results demonstrate that a top-down cascade refinement framework can improve the accuracy of infrared small target detection without sacrificing efficiency. The DeepInfrared toolkit, dataset, and trained models are available at https://github.com/YimianDai/open-deepinfrared to advance further research in this field.

标记数据通常昂贵且耗时，特别是对于诸如对象检测和实例分割之类的任务，这需要对图像的密集标签进行密集的标签。虽然几张拍摄对象检测是关于培训小说中的模型（看不见的）对象类具有很少的数据，但它仍然需要在许多标记的基础（见）类的课程上进行训练。另一方面，自我监督的方法旨在从未标记数据学习的学习表示，该数据转移到诸如物体检测的下游任务。结合几次射击和自我监督的物体检测是一个有前途的研究方向。在本调查中，我们审查并表征了几次射击和自我监督对象检测的最新方法。然后，我们给我们的主要外卖，并讨论未来的研究方向。https://gabrielhuang.github.io/fsod-survey/的项目页面

我们提出对象盒，这是一种新颖的单阶段锚定且高度可推广的对象检测方法。与现有的基于锚固的探测器和无锚的探测器相反，它们更偏向于其标签分配中的特定对象量表，我们仅将对象中心位置用作正样本，并在不同的特征级别中平均处理所有对象，而不论对象'尺寸或形状。具体而言，我们的标签分配策略将对象中心位置视为形状和尺寸不足的锚定，并以无锚固的方式锚定，并允许学习每个对象的所有尺度。为了支持这一点，我们将新的回归目标定义为从中心单元位置的两个角到边界框的四个侧面的距离。此外，为了处理比例变化的对象，我们提出了一个量身定制的损失来处理不同尺寸的盒子。结果，我们提出的对象检测器不需要在数据集中调整任何依赖数据集的超参数。我们在MS-Coco 2017和Pascal VOC 2012数据集上评估了我们的方法，并将我们的结果与最先进的方法进行比较。我们观察到，与先前的作品相比，对象盒的性能优惠。此外，我们执行严格的消融实验来评估我们方法的不同组成部分。我们的代码可在以下网址提供：https：//github.com/mohsenzand/objectbox。

物体检测通常需要在现代深度学习方法中基于传统或锚盒的滑动窗口分类器。但是，这些方法中的任何一个都需要框中的繁琐配置。在本文中，我们提供了一种新的透视图，其中检测对象被激励为高电平语义特征检测任务。与边缘，角落，斑点和其他特征探测器一样，所提出的探测器扫描到全部图像的特征点，卷积自然适合该特征点。但是，与这些传统的低级功能不同，所提出的探测器用于更高级别的抽象，即我们正在寻找有物体的中心点，而现代深层模型已经能够具有如此高级别的语义抽象。除了Blob检测之外，我们还预测了中心点的尺度，这也是直接的卷积。因此，在本文中，通过卷积简化了行人和面部检测作为直接的中心和规模预测任务。这样，所提出的方法享有一个无盒设置。虽然结构简单，但它对几个具有挑战性的基准呈现竞争准确性，包括行人检测和面部检测。此外，执行交叉数据集评估，证明所提出的方法的卓越泛化能力。可以访问代码和模型（https://github.com/liuwei16/csp和https://github.com/hasanirtiza/pedestron）。

The goal of this paper is to serve as a guide for selecting a detection architecture that achieves the right speed/memory/accuracy balance for a given application and platform. To this end, we investigate various ways to trade accuracy for speed and memory usage in modern convolutional object detection systems. A number of successful systems have been proposed in recent years, but apples-toapples comparisons are difficult due to different base feature extractors (e.g., VGG, Residual Networks), different default image resolutions, as well as different hardware and software platforms. We present a unified implementation of the Faster R-CNN [31], R-FCN [6] and SSD [26] systems, which we view as "meta-architectures" and trace out the speed/accuracy trade-off curve created by using alternative feature extractors and varying other critical parameters such as image size within each of these meta-architectures. On one extreme end of this spectrum where speed and memory are critical, we present a detector that achieves real time speeds and can be deployed on a mobile device. On the opposite end in which accuracy is critical, we present a detector that achieves state-of-the-art performance measured on the COCO detection task.

The 1$^{\text{st}}$ Workshop on Maritime Computer Vision (MaCVi) 2023 focused on maritime computer vision for Unmanned Aerial Vehicles (UAV) and Unmanned Surface Vehicle (USV), and organized several subchallenges in this domain: (i) UAV-based Maritime Object Detection, (ii) UAV-based Maritime Object Tracking, (iii) USV-based Maritime Obstacle Segmentation and (iv) USV-based Maritime Obstacle Detection. The subchallenges were based on the SeaDronesSee and MODS benchmarks. This report summarizes the main findings of the individual subchallenges and introduces a new benchmark, called SeaDronesSee Object Detection v2, which extends the previous benchmark by including more classes and footage. We provide statistical and qualitative analyses, and assess trends in the best-performing methodologies of over 130 submissions. The methods are summarized in the appendix. The datasets, evaluation code and the leaderboard are publicly available at https://seadronessee.cs.uni-tuebingen.de/macvi.

本文对实例分割模型进行了全面评估，这些模型与现实世界图像损坏以及室外图像集合，例如与培训数据集不同的设置捕获的图像。室外图像评估显示了模型的概括能力，现实世界应用的一个基本方面以及广泛研究的域适应性主题。当设计用于现实世界应用程序的实例分割模型并选择现成的预期模型以直接用于手头的任务时，这些提出的鲁棒性和泛化评估很重要。具体而言，这项基准研究包括最先进的网络架构，网络骨架，标准化层，从头开始训练的模型，从头开始与预处理的网络以及多任务培训对稳健性和概括的影响。通过这项研究，我们获得了一些见解。例如，我们发现组归一化增强了跨损坏的网络的鲁棒性，其中图像内容保持不变，但损坏却添加在顶部。另一方面，分批归一化改善了图像特征统计信息在不同数据集上的概括。我们还发现，单阶段探测器比其训练大小不太概括到更大的图像分辨率。另一方面，多阶段探测器可以轻松地用于不同尺寸的图像上。我们希望我们的全面研究能够激发更强大和可靠的实例细分模型的发展。

X-ray imaging technology has been used for decades in clinical tasks to reveal the internal condition of different organs, and in recent years, it has become more common in other areas such as industry, security, and geography. The recent development of computer vision and machine learning techniques has also made it easier to automatically process X-ray images and several machine learning-based object (anomaly) detection, classification, and segmentation methods have been recently employed in X-ray image analysis. Due to the high potential of deep learning in related image processing applications, it has been used in most of the studies. This survey reviews the recent research on using computer vision and machine learning for X-ray analysis in industrial production and security applications and covers the applications, techniques, evaluation metrics, datasets, and performance comparison of those techniques on publicly available datasets. We also highlight some drawbacks in the published research and give recommendations for future research in computer vision-based X-ray analysis.

Image segmentation is a key topic in image processing and computer vision with applications such as scene understanding, medical image analysis, robotic perception, video surveillance, augmented reality, and image compression, among many others. Various algorithms for image segmentation have been developed in the literature. Recently, due to the success of deep learning models in a wide range of vision applications, there has been a substantial amount of works aimed at developing image segmentation approaches using deep learning models. In this survey, we provide a comprehensive review of the literature at the time of this writing, covering a broad spectrum of pioneering works for semantic and instance-level segmentation, including fully convolutional pixel-labeling networks, encoder-decoder architectures, multi-scale and pyramid based approaches, recurrent networks, visual attention models, and generative models in adversarial settings. We investigate the similarity, strengths and challenges of these deep learning models, examine the most widely used datasets, report performances, and discuss promising future research directions in this area.

We propose a fully convolutional one-stage object detector (FCOS) to solve object detection in a per-pixel prediction fashion, analogue to semantic segmentation. Almost all state-of-the-art object detectors such as RetinaNet, SSD, YOLOv3, and Faster R-CNN rely on pre-defined anchor boxes. In contrast, our proposed detector FCOS is anchor box free, as well as proposal free. By eliminating the predefined set of anchor boxes, FCOS completely avoids the complicated computation related to anchor boxes such as calculating overlapping during training. More importantly, we also avoid all hyper-parameters related to anchor boxes, which are often very sensitive to the final detection performance. With the only post-processing non-maximum suppression (NMS), FCOS with ResNeXt-64x4d-101 achieves 44.7% in AP with single-model and single-scale testing, surpassing previous one-stage detectors with the advantage of being much simpler. For the first time, we demonstrate a much simpler and flexible detection framework achieving improved detection accuracy. We hope that the proposed FCOS framework can serve as a simple and strong alternative for many other instance-level tasks. Code is available at:tinyurl.com/FCOSv1

复杂的水下环境为物体检测带来了新的挑战，例如未平衡的光条件，低对比度，阻塞和水生生物的模仿。在这种情况下，水下相机捕获的物体将变得模糊，并且通用探测器通常会在这些模糊的物体上失败。这项工作旨在从两个角度解决问题：不确定性建模和艰难的例子采矿。我们提出了一个名为Boosting R-CNN的两阶段水下检测器，该检测器包括三个关键组件。首先，提出了一个名为RetinArpn的新区域建议网络，该网络提供了高质量的建议，并考虑了对象和IOU预测，以确定对象事先概率的不确定性。其次，引入了概率推理管道，以结合第一阶段的先验不确定性和第二阶段分类评分，以模拟最终检测分数。最后，我们提出了一种名为Boosting Reweighting的新的硬示例挖掘方法。具体而言，当区域提案网络误认为样品的对象的事先概率时，提高重新加权将在训练过程中增加R-CNN头部样品的分类损失，同时减少具有准确估计的先验的简易样品丢失。因此，可以在第二阶段获得强大的检测头。在推理阶段，R-CNN具有纠正第一阶段的误差以提高性能的能力。在两个水下数据集和两个通用对象检测数据集上进行的全面实验证明了我们方法的有效性和鲁棒性。

本文介绍了Houghnet，这是一种单阶段，无锚，基于投票的，自下而上的对象检测方法。受到广义的霍夫变换的启发，霍尼特通过在该位置投票的总和确定了某个位置的物体的存在。投票是根据对数极极投票领域的近距离和长距离地点收集的。由于这种投票机制，Houghnet能够整合近距离和远程的班级条件证据以进行视觉识别，从而概括和增强当前的对象检测方法，这通常仅依赖于本地证据。在可可数据集中，Houghnet的最佳型号达到$ 46.4 $ $ $ ap $（和$ 65.1 $ $ $ ap_ {50} $），与自下而上的对象检测中的最先进的作品相同，超越了最重要的一项 - 阶段和两阶段方法。我们进一步验证了提案在其他视觉检测任务中的有效性，即视频对象检测，实例分割，3D对象检测和人为姿势估计的关键点检测以及其他“图像”图像生成任务的附加“标签”，其中集成的集成在所有情况下，我们的投票模块始终提高性能。代码可在https://github.com/nerminsamet/houghnet上找到。

We present a method for detecting objects in images using a single deep neural network. Our approach, named SSD, discretizes the output space of bounding boxes into a set of default boxes over different aspect ratios and scales per feature map location. At prediction time, the network generates scores for the presence of each object category in each default box and produces adjustments to the box to better match the object shape. Additionally, the network combines predictions from multiple feature maps with different resolutions to naturally handle objects of various sizes. SSD is simple relative to methods that require object proposals because it completely eliminates proposal generation and subsequent pixel or feature resampling stages and encapsulates all computation in a single network. This makes SSD easy to train and straightforward to integrate into systems that require a detection component. Experimental results on the PASCAL VOC, COCO, and ILSVRC datasets confirm that SSD has competitive accuracy to methods that utilize an additional object proposal step and is much faster, while providing a unified framework for both training and inference. For 300 × 300 input, SSD achieves 74.3% mAP 1 on VOC2007 test at 59 FPS on a Nvidia Titan X and for 512 × 512 input, SSD achieves 76.9% mAP, outperforming a comparable state-of-the-art Faster R-CNN model. Compared to other single stage methods, SSD has much better accuracy even with a smaller input image size. Code is available at: https://github.com/weiliu89/caffe/tree/ssd .

视频分析的图像分割在不同的研究领域起着重要作用，例如智能城市，医疗保健，计算机视觉和地球科学以及遥感应用。在这方面，最近致力于发展新的细分策略;最新的杰出成就之一是Panoptic细分。后者是由语义和实例分割的融合引起的。明确地，目前正在研究Panoptic细分，以帮助获得更多对视频监控，人群计数，自主驾驶，医学图像分析的图像场景的更细致的知识，以及一般对场景更深入的了解。为此，我们介绍了本文的首次全面审查现有的Panoptic分段方法，以获得作者的知识。因此，基于所采用的算法，应用场景和主要目标的性质，执行现有的Panoptic技术的明确定义分类。此外，讨论了使用伪标签注释新数据集的Panoptic分割。继续前进，进行消融研究，以了解不同观点的Panoptic方法。此外，讨论了适合于Panoptic分割的评估度量，并提供了现有解决方案性能的比较，以告知最先进的并识别其局限性和优势。最后，目前对主题技术面临的挑战和吸引不久的将来吸引相当兴趣的未来趋势，可以成为即将到来的研究研究的起点。提供代码的文件可用于：https：//github.com/elharroussomar/awesome-panoptic-egation